Stainless steel, high alloyed
Rust and acid resistant (stainless) steels | |
|---|---|
EN 10088-3 / AISI | |
| Ferritic and martensitic steel | Austenitic steels |
| All grades +A (annealed) / +QT (quenched and tempered) on request | All grades quenched / resp. +AT (solution annealed) |
| 1.4005 / 416 | 1.4301 ** / 304 * |
| 1.4016 / 430 | 1.4305 ** / 303 * |
| 1.4021 / 420 A | 1.4570 / 303 Cu |
| 1.4028 / 420 F | 1.4306 / 304 L |
| 1.4034 / 420 | 1.4307 ** / 304 L * |
| 1.4104 / 430 F * | 1.4401 ** / 316 * |
| 1.4105 / 430 F | 1.4404 ** / 316 L * |
| 1.4112 / 430 B | 1.4541 / 321 |
| 1.4122 / 430 C | 1.4571 / 316 Ti * |
* always in stock
** also available in better machinable quality.
Further steel grades available on request
Dimensions | Drawn | Peeled | Ground |
|---|---|---|---|
Round | 6 - 36 mm | 5 - 80 mm | |
Hexagonal | 8 - 27 mm | ||
Square | 8 - 20 mm | ||
Flat | On request | ||
Profile | On request | ||
Tolerance Ranges | ISO 11 - ISO 9 | ISO 11 - ISO 9 | ISO 11 - ISO 6 |
Special tolerances on request Special surface roughness requirements by arrangement | |||
Crack Detection | Eddy-current and US inspection | ||
Bar Length | Manufactured lengths from 2.5 to 7.0 m, or fixed lengths on request | ||
